The Crosby Screw Pin Anchor Shackle Galvanized G-209 is used for overhead lifting, towing, and other rigging applications. The Crosby Screw Pin Anchor Galvanized Shackle is forged, quenched and tempered with an alloy pin, and includes a safety design factor of 6:1.
Crosby S.P.A. Shackle Galvanized G-209
$9.07 – $1,533.23
Description
The Galvanized S.P.A. Shackle is used for overhead lifting, towing, and other rigging applications. Shackles are the most versatile and essential rigging hardware, and connect rigging components together such as nylon and polyester slings, master links, hooks, and other wire rope assemblies. Screw Pin Galvanized Shackles may be used in side-loading applications with required reduction of Working Load Limits. Unlike Bolt-Type shackles, they are not to be used for long-term installations.
Product Features Include:
- Capacities 1/3 thru 55 metric tons, grade 6.
- Forged – Quenched and Tempered, with alloy pins.
- Working Load Limit and grade “6” permanently shown on every shackle.
- Hot Dip galvanized
- Fatigue rated.
- Shackles 25t and larger are RFID EQUIPPED.
- Meets or exceeds all requirements of ASME B30.26.
- Look for the Red Pin®. . . the mark of genuine Crosby quality.
Failure to read the proper warning and application information may result in serious injury or death. Visit TheCrosbyGroup.com for full product warning and application information.
The S.P.A. Shackle is used in Pick and Place* applications. For permanent or long-term installations, Crosby recommends the use of bolt type shackles. If you choose to disregard Crosby’s recommendation, the screw pin shall be secured from rotation or loosening (Page 90, Crosby Catalog 2016).
Screw pin shackles can be used for applications involving side-loading circumstances. Reduced working load limits are required for side-loading applications. While in service, do not allow the screw pin to be rotated by a live line, such as a choker application.
* Pick and Place application: Pick (move) a load and place as required. Tighten screw pin before each pick.
QUIC-CHECK® INFORMATION: All Crosby Shackles, with the exception of 2160, 2169, 2170, 252 and 253 styles incorporate markings forged into the product that address an easy to use QUIC-CHECK® feature. Angle indicators are forged into the shackle bow at 45 degree* angles from vertical. These are utilized on screw pin and bolt type shackles to quickly check the approximate angle of a two-legged hitch, or quickly check the angle of a single leg hitch when the shackle pin is secured and the pull of the load is off vertical (side loaded), thus requiring a reduction in the working load limit of the shackle. * Round Pin Shackles utilize the 45 degree QUIC-CHECK® indicators to ensure load is applied strictly in-line.
*Note – Though technically incorrect, A Shackle is sometimes referred to as a Clevis
Additional information
| Weight | N/A |
|---|
