Crosby IPU10 Universal Lifting Clamp is a vertical clamp that can lift in any direction. It is for lifting, turning, moving, and vertical transfer of sheet metal, plates, or fabrications from horizontal (0°) to vertical (90°) to horizontal (180°) again as needed.
Crosby IPU10 Universal Lifting Clamp
$742.70 – $1,087.02
Description
Crosby IPU10 Universal Lifting Clamp has a hinged hoisting eye that allows for the clamp to place and lift the load from any direction, or with a multiple leg sling without side-loading the clamp.
Product Features Include:
- Universal Lifting Clamp – For Lifting in any Direction
- Available in capacities of .5 thru 2 metric tons (Higher Working Load Limits are available upon request).
- Wide variety of jaw openings available
- Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
- Individually Proof Tested to 2 times the Working Load Limit with certification.
- Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body.
- Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
- IP10 – Standard clamp for materials with a surface hardness to 363HV10 (345 HB).
- Full 180° turning range for material transfer, turning or moving.
- Lock open, lock closed ability with latch for pretension on material and then release of material.
- Minimum WLL of 10% of Maximum WLL.
- Maintenance replacement kits are available.
- Manufactured by an ISO 9001 facility.
- All sizes are RFID EQUIPPED.
Vertical Clamps Are Especially Hazardous.
Failure to read the proper warning and application information may result in serious injury or death. Visit TheCrosbyGroup.com for full product warning and application information.
Additional information
| Weight | N/A |
|---|
