The Crosby IP10 Vertical Lifting Plate Clamp is for lifting, turning, moving, and vertical transfer of sheet metal, plates, or fabrications from horizontal (0°) to vertical (90°) to horizontal (180°) again as needed.
Crosby IP10 Vertical Lifting Plate Clamp
$565.95 – $1,868.40
Description
The Crosby IP10 Vertical Lifting Plate Clamp is usually used as a single point pick. The Vertical Plate Clamp is also used with a spreader beam with multiple vertical drop lines.
Product Features Include:
- For Vertical Lifting, Turning and Transfer
- Available in capacities of .5 thru 6 metric tons (Higher Working Load Limits are available upon request).
- Wide variety of jaw openings available: 0” to 6.10”.
- Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
- Individually Proof Tested to 2 times the Working Load Limit with certification.
- Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body.
- Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
- IP10 – Standard clamp for materials with a surface hardness to 363HV10 (345 HB).
- Full 180° turning range for material transfer, turning or moving.
- Lock open, lock closed ability with latch for pretension on material and then release of material.
- Optional IP-5000 Stinger assembly available (see page 428). Allows for easy connection between the clamp and hoist hook.
- Minimum WLL of 10% of Maximum WLL.
- Maintenance replacement kits are available.
- Manufactured by an ISO 9001 facility.
- All sizes are RFID EQUIPPED.
Vertical Clamps Are Especially Hazardous.
Failure to read the proper warning and application information may result in serious injury or death. Visit TheCrosbyGroup.com for full product warning and application information.
Additional information
| Weight | N/A |
|---|
