The Crosby Screw Pin Anchor Galvanized Alloy Shackle G-209A is used for overhead lifting, towing, and other rigging applications. Alloy Shackles are much stronger for their size than other types of shackles. The Crosby Screw Pin Anchor Galvanized Alloy Shackle is forged alloy steel, quenched and tempered with an alloy pin, and includes a minimum ultimate strength of 4.5 times the Working Load Limit.
Crosby S.P.A. Galvanized Alloy Shackle G-209A
$17.48 – $265.43
Description
The strength to size ratio of an Alloy Shackle makes it a necessary component of any professional rigging package. Shackles are handy for connecting nylon and polyester slings, master links, hooks, and other wire rope assemblies. Screw Pin Alloy Shackles may be used in side-loading applications with required reduction of Working Load Limits. Unlike Bolt-Type shackles, they are not to be used for long-term installations.
Product Features Include:
- Capacities 2 thru 21 metric tons. Meets performance requirements of Grade 8 shackles.
- Forged Alloy Steel – Quenched and Tempered, with alloy pins.
- Working Load Limit permanently shown on every shackle.
- Hot Dip Galvanized.
- Approved for use at -40 degree C (-40 degree F) to 204 degree C (400 degree F).
- Meets or exceeds all requirements of ASME B30.26
Failure to read the proper warning and application information may result in serious injury or death. Visit TheCrosbyGroup.com for full product warning and application information.
Product Specifications
The Screw Pin Alloy Shackle is used in Pick and Place* applications. For permanent or long-term installations, Crosby recommends the use of bolt type shackles. If you choose to disregard Crosby’s recommendation, the screw pin shall be secured from rotation or loosening (Page 90, Crosby Catalog 2016).
Screw pin shackles can be used for applications involving side-loading circumstances. Reduced working load limits are required for side-loading applications. While in service, do not allow the screw pin to be rotated by a live line, such as a choker application.
* Pick and Place application: Pick (move)
QUIC-CHECK® INFORMATION All Crosby Shackles, with the exception of 2160, 2169, 2170, 252 and 253 styles incorporate markings forged into the product that address an easy to use QUIC-CHECK® feature. Angle indicators are forged into the shackle bow at 45 degree* angles from vertical. These are utilized on screw pin and bolt type shackles to quickly check the approximate angle of a two-legged hitch, or quickly check the angle of a single leg hitch when the shackle pin is secured and the pull of the load is off vertical (side loaded), thus requiring a reduction in the working load limit of the shackle.
*Note – Though technically incorrect, A Shackle is sometimes referred to as a Clevis
Additional information
| Weight | N/A |
|---|
